Recently, the brand new photovoltaic brand Anhui YuanTech Solar Co., Ltd. (YuanTech Solar, hereinafter referred to as "YuanTech Solar") has received good news of new certification. Relying on its excellent technological level and technical ability, the company has obtained the MCS certification issued by the British Micro Power Generation Products Planning Committee, and the pace of overseas market penetration of the company's component products has gradually accelerated.

MCS (Microgeneration Certification Scheme, Microgeneration Product Certification Scheme) is a government agency managed by the Microgeneration Product Certification Scheme Committee of the United Kingdom, and the quality certification certificate issued by MCS is a necessary qualification for photovoltaic modules to enter the UK market. According to the review process, solar photovoltaic products certified by MCS must comply with relevant standards and provide qualified test reports, which are usually based on IEC/EN61215 test reports issued by authorized NCB and then audited by the factory production control system. Based on its own authoritative test report and certificate application, Yuantai Solar has successfully passed the factory review of MCS010 general factory production control and product quality requirements, and finally obtained the British MCS certification. This not only provides a new evidence for the high-quality production level of Yuantai Solar, but also lays a solid foundation for its development in the UK and more overseas markets.

At present, Yuantai Solar leans production to build n-type TOPCon photovoltaic modules, using M10 silicon wafer to carry n-type TOPCon battery technology, module products have excellent performance in conversion efficiency, attenuation, temperature coefficient and other aspects, the power range of each version of the module covers 410 W-575 W, which can perfectly match the mainstream system design and mature low-cost. It can fully meet the installation needs of household and industrial and commercial roofs, large ground power stations and other application scenarios, and bring considerable economic benefits to scenario users.

The PERC PV module developed by the company is based on M10/G12 large silicon wafer technology platform, and adopts advanced MBB, non-destructive cutting, intelligent welding and other module technologies in the industry. The module power covers 530 W-670 W, which can widely meet distributed applications and large-scale ground power station projects.

近日，全新光伏品牌安徽元太光伏科技有限公司（YuanTech Solar，以下简称“元太光伏”）再传新认证喜讯，公司依托过硬的工艺水平和技术能力，获得了由英国微型发电产品计划委员会颁发的MCS认证证书，公司组件产品海外市场渗透节奏逐步加快。

MCS（Microgeneration Certification Scheme，微型发电产品认证方案）是由英国微型发电产品认证计划委员会来管理的政府机构，其所颁发的光伏产品质量认证证书是光伏组件进入英国市场必备的准入资格。根据评审流程，MCS认证的太阳能光伏产品必须符合相关的标准并提供合格的测试报告，通常需基于获得授权的NCB颁发的IEC/EN61215的测试报告再进行工厂生产控制体系审核来完成。元太光伏基于自身已取得的权威测试报告和证书申请，成功通过MCS010通用工厂生产控制和产品质量要求的工厂审查，并最终取得英国MCS认证证书。此举不仅再次为元太光伏高品质生产水平提供了全新佐证，更为其开拓英国及更多海外市场打下坚实基础。

目前，元太光伏精益生产打造n型TOPCon光伏组件，采用M10硅片搭载n型TOPCon电池技术，组件产品在转换效率、衰减、温度系数等方面性能表现优异，各版型组件功率范围覆盖410W-575W，可完美匹配主流系统设计和成熟低成本运输方案，能够充分满足户用和工商业屋顶、大型地面电站等应用场景安装需求，并为场景用户带来极为可观的经济收益。

公司开发的PERC光伏组件基于M10/G12大硅片技术平台，采用行业先进的MBB、无损切割、智能焊接等多种组件技术，组件功率覆盖530W-670W，可广泛满足分布式应用和大型地面电站项目。

英国光伏市场在经历了补贴机制调整后，目前主要以国家重大基础设施项目(NSIP)和差价合约(CfD)拍卖的方式进行，再加上2022年俄乌冲突带来的能源危机，光伏市场特别是户用屋顶需求增长显著。元太光伏表示，英国乃至全球市场增量为公司发展带来更多机会与挑战，公司将继续坚持以市场为导向，加快创新组件产品的开发与生产，以求为市场带来前沿方案全新选择。